How To Clean Salt Water Pool Filter

Download Article

Download Article

Table salt h2o pools are pop options for homeowners who want a puddle in their yard, as they are easier to clean and maintain than chlorine pools. Table salt h2o is as well less harsh on peel and hair than traditional chlorinated water.^[1] To maintain your salt water pool, you should continue the puddle make clean, with no droppings or dirt. You lot should as well test the salt water to ensure the chlorine, pH, and alkalinity levels are correct in the puddle. If you lot programme to have a lot of people in the pool, yous should shock the water and then you can all enjoy a clean common salt water pool.

1. one

   Remove surface clay and debris with a paw vacuum twice a week. Get a hand vacuum for the pool at your local pool supply store or online. The vacuum attaches to your skimmer box to create suction. You then push the vacuum around the surface of the pool with a pole to suck upwards dirt and debris.^[2]

   • A good hand vacuum of the puddle volition take 1 to 1.5 hours. Go far the habit of cleaning the puddle at least ii times a week, especially if your pool is outdoors and uncovered.

2. 2

   Get a mechanical pool cleaner. You can likewise purchase a mechanical puddle cleaner that works on its own to suck up droppings and clay.^[3] Expect for a suction pool cleaner at your local pool supply shop or online. Run the mechanical pool cleaner at least twice a calendar week to keep the pool clean.^[iv]

   • You lot can as well invest in a force per unit area cleaner or a robot cleaner for the puddle, though they volition be more expensive.

   Advertizement

3. iii

   Run the pump, skimmer, and filter in the pool at all times. Your salt water pool should have a pump, skimmer, and filter in information technology to assist keep it clean. Brand certain you run these components in the pool at all times to help suck up dirt and droppings.^[five]

4. iv

   Make clean the pump, filter, and skimmer in one case a week with water. Cheque the pump, filter, and skimmer once a week to ensure they are not blocked or clogged by droppings. Utilize a hose to smash away whatever dirt or debris. You can besides put the pool components under running water to clean them.^[6]

   • Clean the pump, filter, and skimmer after a big storm or a big party in the pool, every bit there will probable be more debris in the pool that can clog these components.

5. 5

   Make clean the generator prison cell every 3 months. The salt in the puddle water can build upward in the generator cell, causing scaling or crystallizing. Arrive the habit of cleaning the generator jail cell in the puddle so it is not clogged and can work properly. Use a loftier pressure level hose to blast off the build up on the prison cell.^[vii]

   • You can also scrape off salt build up with a wooden or plastic tool.
   • If the build upwardly is really stubborn and hard to get off, you lot can soak the jail cell in 4 parts h2o and 1 role muriatic acid. Allow the jail cell to soak for a few minutes and so rinse it off with water.

   Ad

1. 1

   Use a examination kit to check the free chlorine and pH levels weekly. Become a quality pool exam kit at your local pool supply store or online. The kit may utilize test strips or a driblet examination. Bank check that the gratis chlorine levels are ane-3 parts per 1000000 (ppm). Make sure the pH levels are at vii.two-7.eight. This volition ensure the pool stays clean and functions well.

   • If you need to lower the pH levels in the pool, you tin add together muriatic acid to the water. To raise the pH levels, add together sodium bicarbonate.
   • Consult your owner's manual or speak to a professional table salt pool cleaner if y'all demand guidance.

2. 2

   Check the stabilizer levels weekly. The stabilizer levels help to forbid the chlorine in your pool from being lost due to UV rays from the sun. Use a test kit to cheque the stabilizer levels. If you have an outdoor pool, make certain the stabilizer levels are at seventy-80 ppm. If yous have an indoor puddle, y'all should take stabilizer levels at 0-30 ppm.

   • You can lower the stabilizer levels by draining the pool and adding fresh water to dilute the pool water.
   • You can heighten the stabilizer levels by adding cyanuric acid to the pool water, based on the manufacturer'due south instructions.

3. 3

   Check the alkalinity, calcium, and salt levels once a calendar month with a test kit. The alkalinity level helps to keep the pH level stable. Information technology should be between 80-120 ppm. Yous can bump up the alkalinity level past adding blistering soda to the water and reduce information technology by calculation hydrochloric acid.^[8]

   • The calcium in the water helps to prevent the water from becoming corrosive and cloudy. It should be at 200-400 ppm. Y'all can add calcium to the pool to bump up the calcium level and reduce the amount you add to bring the calcium level down.
   • The salt level should exist in the range specified by the manufacturer of the pool. This is usually around 2700-4500 ppm. You lot tin add together more table salt to the water to crash-land up the salt level to where information technology should be. E'er make sure the cell in your pool is working so the salt can circulate properly.

4. iv

   Cheque that there are no metals in the water. Make sure metals like copper, iron, and manganese are not present in the h2o by using a test kit. Bank check for metals when yous add fresh water or at the start of the pool season. These metals tin lead to corrosion and other issues in the pool if they are nowadays.

   Advert

1. 1

   Get chlorine to shock the pool. Look for chlorine solutions designed to stupor your pool at your local pool supply shop or online. Brand sure it is safety for use on all pool types, including common salt water pools.

2. 2

   Test the levels in the puddle. Make sure the chlorine and pH levels are correct in the pool. Check that the calcium, alkalinity, table salt, and stabilizer levels are right also. This will ensure shocking the pool volition not cause whatsoever staining or damage.^[9]

   • Shocking the pool with chlorine is a adept way to preclude the water from condign cloudy and polluted if you lot are having a lot of people in the puddle. It's also a skillful way to give your puddle a deep clean one time a twelvemonth.

3. 3

   Determine the right amount of chlorine. For a standard size table salt h2o puddle, you may employ three pounds (1.iv kg) of chlorine per 1,000 gallons (3,800 L) of water. Check the manufacturer's instructions if your pool is smaller or larger than the standard size.

4. 4

   Add the chlorine a little at a time. Brand sure the filter system is working and the pH is betwixt 7.2-vii.4. Add the chlorine a minor amount at a time effectually the edges of the pool. Let the chlorine deliquesce into the pool water.

5. v

   Wait 8 hours and test the chlorine levels before using the pool. Use a examination kit to check the chlorine levels in the pool. Make sure the chlorine levels have dropped and the water is safe to swim in before you lot utilize the pool.

   Advertisement

Add New Question

• Question

  How can I keep my pool from looking dull?

  

  Rob Litman
  Licensed Landscaper & General Contractor

  Rob Litman is a Landscaper, General Contractor, and the CEO of Vitoli Inc., a landscaping, hardscaping, ecoscaping, and pond pool design company in Los Angeles, California. With over xx years of experience in structure, Rob specializes in energy-efficient and drought-tolerant landscaping. He holds Full general Edifice Contractor (Class B) and Registered Pool/Spa Contractor Licenses. In 2007, Rob won House of the Year in Gardena, California.

  

  Licensed Landscaper & Full general Contractor

  Practiced Answer

  

  Support wikiHow by unlocking this expert answer.

  The well-nigh important affair yous can do to keep your puddle clean is to go a cocky-operating vacuum. Information technology works about 6 hours a 24-hour interval, and it will actually practice wonders for the colour of your pool. Information technology's as well a actually affordable solution.

Ask a Question

200 characters left

Include your e-mail address to get a message when this question is answered.

Submit

Advertisement

About This Commodity

Commodity Summary X

To maintain a table salt h2o pool, yous'll need to routinely clean the h2o and components, and test its pH levels. Use a pool vacuum or mechanical pool cleaner twice a week to clear whatever dirt and debris from the h2o. Once a week, clean the pump, filter, and skimmer by using a hose to blast them or running them under the faucet. You should also use a test kit to check the free chlorine and pH levels once a week to brand sure the h2o is clean. Every 3 months, clean the generator cell with a hose or faucet to forbid scaling or crystalizing from the table salt. For more tips, including how to to test the calcium and salt levels in your pool, read on!

Did this summary help you?

Thank you to all authors for creating a folio that has been read 39,769 times.

Did this article assistance you?

Source: https://www.wikihow.com/Maintain-a-Salt-Water-Pool

Posted by: johnsonfamembady.blogspot.com

Share this post